Safety and well being of people is of utmost concern at all Jyothi Gas business units. Our safety view encompasses our own assets and people, as well as those of our customers, partners and the general public.
| | For LPG appliances | Always use BIS approved appliances Obtain BIS approved rubber tubes and LPG regulators from authorized distributors only
| | While receiving cylinders | Check the cylinder has been delivered with the company seal and safety cap intact.
If you are not sure about usage, please ask the delivery person for a demonstration.
Cylinders must be installed at ground level on a level surface.
Don’t move around the cylinder by dragging, rolling on body or dropping from height
| | Before Usage | Check to see that rubber ‘O’ ring inside the cylinder valve is present
Check for any visible signs of leakage – through visual inspection, soap solution or smell
Never use lighted match-sticks for checking leaks
Always keep the cylinder in upright position at ground level at a well ventilated place
Do not install the LPG cylinder in the cabinet
The LPG stove must always be installed on kitchen slab at height above the cylinder
The cylinder must be kept away from other sources of heat
| | After Usage | Close the regulator knob to ‘OFF’ position when cylinder is not in use
The empty cylinders must be stored in a cool and well ventilated place with safety cap put ON
| | Servicing | Replace your rubber tube at least every two years
Get your gas appliances periodically serviced
| | In case of Leak | Do not Panic
Do not Switch On or Switch Off any electrical appliances in the room
Extinguish all flames, lamps, incense sticks, etc
Close the appliance and LPG regulator
Put On the Safety Cap on the cylinder
Open all Doors & Windows for ventilation
Never use an electric fan for ventilation
Call your Jyothi Gas dealer / Company for help
| | Maintenance | Get your gas appliances periodically serviced
Get your LPG manifold periodically serviced
Before carrying out any maintenance work, a work permit shall be obtained
All maintenance operations inside the LPG yard must be carried out by authorized service personnel only
No hot work like welding, cutting, heating shall be carried inside the LPG installation (fenced area)
All maintenance work for burners or combustion system should be carried out through authorized service personnel | | | | | | |
|
